FAQ
Questions we hear on every site
Coverage, mixing, setting times, grades and supply — the practical answers our dealers and contractors ask for most.
How much area does one 20 kg bag cover?+
Approximately 55–60 sq. ft. with a 6 × 6 mm square notched trowel at an average 3 mm bed. Coverage changes with trowel size, tile type and how even the substrate is.
How much water do I mix per bag?+
5.5–6 litres of clean water per 20 kg bag. Add powder to water, mix to a lump-free paste, rest 5 minutes and remix. Use within 2 hours.
Do I still need to soak the tiles or cure the floor?+
No. Polymer-modified adhesive needs a dry, dust-free surface and no curing water. Soaking tiles is what causes hollow tiles with traditional cement mortar.
When can I grout and walk on the floor?+
Tiles set in 24 hours, so grouting the next day is safe. Full strength is reached after 28 days.
Can I lay new tiles over existing tiles?+
Yes. Our adhesives bond to existing tiles, concrete, plaster and marble, which makes them ideal for renovation without demolition.
Is it suitable for swimming pools and washrooms?+
Yes. The polymer content gives excellent water resistance for permanently wet areas including pools, showers, terraces and washrooms.
What is the difference between Grey, White and Platinum grades?+
Grey (₹750) is the standard grade, White (₹850) is used with translucent and light-coloured tiles or marble, and Platinum (₹1150) is our highest-strength grade for large-format and demanding installations. All prices include taxes.
What is the shelf life and how should bags be stored?+
12 months from the date of manufacturing when kept dry and sealed. Store bags off the floor in a covered, dry godown.
Do you supply dealers and contractors outside Amritsar?+
Yes. We are a B2B supplier and dispatch pallet and truckload quantities to dealers, builders and contractors across Punjab and neighbouring states.
Can I get samples or a technical data sheet?+
Send us your tile type, area in square feet and location through the contact page and we will share pricing, guidance and sample availability.
Which adhesive should I use for bathroom tiles?+
For bathroom walls and floors use the White grade of Primo Fixx or Mighty Bond. For shower areas, tile-over-tile work or large-format vitrified tiles, step up to Flex Grip or the Platinum grade for extra flexibility.
Is it waterproof?+
The adhesive itself is highly water resistant and performs permanently in wet areas such as washrooms, showers, terraces and swimming pools. It is not a substitute for a waterproofing membrane — apply the membrane first, then tile over it with our adhesive.
Do I need an admix?+
Not for normal ceramic and vitrified tiling — clean water is enough. Use Primo Fixx Adhesive Admix for natural stone, granite, marble and demanding exterior or heavy-traffic installations where you want maximum flexibility and bond strength.
Do you supply in bulk to dealers and contractors?+
Yes. We are a B2B manufacturer and supply pallet and truckload quantities to dealers, distributors, builders and contractors across Punjab and neighbouring states, with dealer pricing and repeat-order support.
Question not listed?
Send us the tile size, substrate and exposure. We will tell you exactly which grade to use and how many bags you need. Mehul Bhandari replies to dealer and site enquiries directly.
Ask us directly